• Vital-Water Bioresonance-Converter wbc

    Product details

    The i-like bioresonance technology realigns the information in water. Water molecules become de-clustered and new, well-flowing information (Gu-Qi = food energy) is created. The result is very harmonious „informed“ water. The aim is to provide people and those around them (family, pets, plants, etc.) with living, energetic water in their own homes and for every source of water within them.

    Application
    Each person consumes an average of 150 litres of water per day in a normal household (Swiss average: 142 l/E*d [1]). This guide value is the basis for calculating the required number of Vital-Water Bioresonance-Converters per household.

    For a „normal“ single-family household, a Vital-Water Bioresonance-Converter should be installed in each household for 6 persons (in case of doubt, please always round up). The Vital-Water Bioresonance-Converter is installed directly at the central main water pipe (cold water connection - max. 50°C) of a detached house. If several converters are required (higher number of persons in the household), please place them behind or next to each other (not on top of each other) directly on the pipe.
    Important: If you have a filter system installed, place the converter after the filter in the flow of water.

    For a flat, a Vital-Water Bioresonance-Converter should be installed per 6 persons in the household (in case of doubt, please always round up). Here the converter is attached to the direct supply line (cold water connection - max. 50°C) of the flat. Due to its placement on the supply line, only the number of persons who obtain their water via this direct supply line must be taken into account. Normally, each flat has its own supply line. Your property manager will tell you which supply line is yours. If several converters are required (higher number of persons in the household), please place them behind or next to each other (not on top of each other) directly on the pipe.
    Important: If you have a filter system installed, place the converter after the filter in the flow of water.

    The Vital-Water Bioresonance-Converter „informs“ min. 1,000 litres of water and significantly more per day. Therefore, a converter in private households is usually sufficient for garden irrigation, washing, bathing, showering, etc. without any problems.

    Testing evidence and measurements

    The Vital-Water Bioresonance-Converter was awarded by the laboratory Hado Life (Dr Emoto/Dipl.Ing. Gaupp-Berghausen) for its excellent water quality.

    The i-like Vital-Water Bioresonance-Converter vitalises flowing water in large and small buildings, swimming pools, wellness facilities and the like.

    Service life: a minimum of 30 years

    Read more

    CHF1,490.00 incl. VAT
    -
    +
    26100 Vital-Water Bioresonance-Converter 1x
    CHF1,490.00
    -
    +

Product details

The i-like bioresonance technology realigns the information in water. Water molecules become de-clustered and new, well-flowing information (Gu-Qi = food energy) is created. The result is very harmonious „informed“ water. The aim is to provide people and those around them (family, pets, plants, etc.) with living, energetic water in their own homes and for every source of water within them.

Application
Each person consumes an average of 150 litres of water per day in a normal household (Swiss average: 142 l/E*d [1]). This guide value is the basis for calculating the required number of Vital-Water Bioresonance-Converters per household.

For a „normal“ single-family household, a Vital-Water Bioresonance-Converter should be installed in each household for 6 persons (in case of doubt, please always round up). The Vital-Water Bioresonance-Converter is installed directly at the central main water pipe (cold water connection - max. 50°C) of a detached house. If several converters are required (higher number of persons in the household), please place them behind or next to each other (not on top of each other) directly on the pipe.
Important: If you have a filter system installed, place the converter after the filter in the flow of water.

For a flat, a Vital-Water Bioresonance-Converter should be installed per 6 persons in the household (in case of doubt, please always round up). Here the converter is attached to the direct supply line (cold water connection - max. 50°C) of the flat. Due to its placement on the supply line, only the number of persons who obtain their water via this direct supply line must be taken into account. Normally, each flat has its own supply line. Your property manager will tell you which supply line is yours. If several converters are required (higher number of persons in the household), please place them behind or next to each other (not on top of each other) directly on the pipe.
Important: If you have a filter system installed, place the converter after the filter in the flow of water.

The Vital-Water Bioresonance-Converter „informs“ min. 1,000 litres of water and significantly more per day. Therefore, a converter in private households is usually sufficient for garden irrigation, washing, bathing, showering, etc. without any problems.

Testing evidence and measurements

The Vital-Water Bioresonance-Converter was awarded by the laboratory Hado Life (Dr Emoto/Dipl.Ing. Gaupp-Berghausen) for its excellent water quality.

The i-like Vital-Water Bioresonance-Converter vitalises flowing water in large and small buildings, swimming pools, wellness facilities and the like.

Service life: a minimum of 30 years

Read more

  • With the e-smog converter, it is possible to neutralise negative information from all mobile telecommunications systems (incl. 5G), from LED and infrared radiation, and from devices and cables that produce e-smog.

    Content: 3 converters in the same package

    Service life: 2020-2023

    Read more

    Product details

    Application
    The e-smog converter is suitable for use on all electronic devices, especially transmitters and receivers. The converter can be glued directly onto the device, or left in its packaging and placed within a radius of max. 30 cm from the device. For optimal functionality, the converter should not be placed under a cover or case, but attached to the outside of the device. The converter must not be bent, cut off or otherwise deformed. The converter is not waterproof (but is splashproof).

    Testing evidence and measurements

    Example:
    subject was extensively measured in an appropriate laboratory both before and after the application of an converter! The subject was male, 46 years old.



    The picture on the left shows 39% health parameter in the body‘s condition prior to the use of the converter, whereas on the right, the condition with the converter, there is a health parameter of 68%.

     



    The spline map shows the electrical activity of the brain. Without the converter, on the left, very tense. On the right, with the converter, significantly more balanced.

     



    The gerontological curve shows - without chip - as a “biological age” 49 years, after the 20-minute application of the chip one of 40 years (“rejuvenation effect”).

     

    Conclusion of the Health Campus at St. Elisabeth University
    “With these test subjects we could once again show that the autocorrelation IVG, neurodynamic matrix, the biodynamic age, the spline chart brain activity, the health index and further values have improved on average by over 80%. This, after 20 minutes of using the converter!”             

    -
    +
    12003 e-smog Converter 3er-Set 1x
    CHF99.00
    -
    +
  • The i-chip is a unique converter that is capable of providing the body with different frequencies thanks to i-like technology at the information level. For full functionality, the i-chip requires an electromagnetic wave. Consequently, the combination of e-smog converter and i-chip is ideal. 

    For more detailed information on the function of the i-chip, please contact your personal consultant.

    Service life: 2020-2023

    Product details

    Application
    The i-chip requires an electromagnetic wave for full functionality. That is why the converter is suitable for use on all electronic devices (e.g., mobile phones). The converter can be glued directly onto the device, or left in its packaging and placed within a radius of max. 30 cm from the device. The converter must not be bent, cut off or otherwise deformed. The converter is not waterproof (but is splashproof).

    -
    +
    12010 i-chip Converter 1x
    CHF39.90
    -
    +
  • Active-Bioresonance Bamboo-Vitalplasters are easy to use, highly effective and let the user quickly sense, what changes can be achieved. The first night can be an experience in itself. Simple „stick on and experience.“

    Product details

    Use
    Stick Active-Bioresonance Bamboo-Vitalplasters onto your washed feet each night for 30 nights. After sleeping the patches may be removed. They are usually soaked and slaggy-brown. But purely energetic changes are also noticeable.

    In addition to the main application in the middle of the sole of the foot, there are almost countless other points on feet, legs as well as on the whole body, which can be activated with the Active-Bioresonance Bamboo-Vitalplasters. The possibilities can be elucidated in technical literature, as well as via the personal advice of consultants.







    Testing evidence and measurements

    This study shows what pH level changes can take place in a patch before and after use.

    Before application
    The pH value of a new plaster is about 7.8 - 8.0 = basic
    After application
    The pH value of a used plaster is around 3.8 - 4.8 = a large amount of acid was excreted overnight

    Ingredients
    Phyllostachys bambusoides, Agaricus blazei, Houttuynia Cordata, Zingiber officinale, Mespilus germanica, Artemisia absinthium L., Tetradium daniellii, Tourmaline, Mineralium, Vestigium elementa, Vitaminum C, Vitaminum E

    -
    +
    50020 60x Vitalpflaster 1x
    CHF174.50
    -
    +
Scroll